Parts & Accessories

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

• Includes a plastic storage box, 6 patches, cement, and scuffer

- Quick sealing and stop punctures up to 1/4 inch - Can be used year around - -09: Box of 12 bottles

The Product that Started a Tubeless Revolution Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant. Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires. - First choice of riders around the world for tubeless conversion and flat prevention - Seals punctures up to 1/4-inch (6.5mm) quickly - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment - Can be injected through valve stems with removable cores compatible with tubes and tubular tires

Specialized's 2Bliss Ready Rim Strips create a secure barrier, from sealant to rim, in a clean, simple to install strip. Mountain bike riders running 2Bliss can now change tires quicker and easier than with any other tubeless system. Diameter / Width - 26" — 23mm-559 PV - 26" — 25mm-559 PV - 650b — 31mm-584 PV - 650b — 39mm-584 PV - 29" — 23mm-622 PV - 29" — 25mm-622 PV - 29" — 31mm-622 PV

The FlatBoy patch kit will be your best friend when road-/trail-side flat repairs are needed. It features a set of six self-adhesive patches, sandpaper to lightly roughen before applying, and instructions in a snap-shut kit. Patches conform to inner tube perfectly and the kit is compact so you can always find a spot to carry one. Don't leave home without it. - Easy to apply to your inner tube so your ride can continue on unhindered. - Glueless patches with no mess. - Six patches are housed in a small, lightweight container that fits in the smallest places.

Our Rim Strips provide the ultimate in protection between the rim and tube for all types of bicycle setups. - Nylon for maximum strength and effectiveness. - Conforms to rim profile.

Protect your tube from spoke hooks with CT Cotton Rim Tape. - Adhesive Backing - 10 Rolls Per Box

Are you switching your bike over to tubeless or in need of valve replacements? Serfas' Tire RX replacement valves will do the trick. Complete with 32mm valves with removable cores, an extra valve core, Schrader/Presta adaptor & a core removal tool. - Two 32mm Presta Valves - Valve Key - Includes Additional Valve Core - Removable Cores - Fits All Rims, Standard & Tubeless - Presta To Schrader Adapter

Seal your wheel with Serfas' tubeless rim tape. - Good For 2 Wheels With 2 Layers - High-Quality Light Rim Tape For Preventing Air/Sealant Leakage Through Spoke Holes

Special assembly liquid for bicycle tires. A practical sponge applicator allows the liquid to be applied to the tire bead very simply - without smudging fingers. When inflating, the tire bead slides easily into the correct position on the rim. The liquid evaporates completely after about 10 minutes!

Prevents thorns and other road debris from puncturing the inner tube and deflating the tire. - Packaged in a process that avoids the difficult to install "pigtails" traditionally associated with liners - Equipped with Soft-Tips that prevent friction flats at the overlapping seam - Sold in pairs

The Problem Solvers Presta Valve Extenders add 30 to 70mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders are for use with Presta valves that have removable cores. The proper tool for removing the cores and installing the extenders is included.

The Problem Solvers Presta Valve Extenders add 33 to 50mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders simply screw onto your Presta valves by hand.

Orange Seal’s rim tape comes in 18mm, 24mm, and 45mm widths fitting most bike rims. The elasticity of the tape allows greater flexibility in fitting different types of rims and form factors.

Your tubeless wheels will benefit from the use of Orange Seal Tubeless Tire Sealant. It is proven to seal large punctures up to 1/4-inch and perform under varying temperatures and altitudes. Orange Seal Tubeless Tire Sealant is compatible with most bike tire systems and is eco-friendly.

The VersaValve stem utilizes a large, sturdy base plate that can be fitted on different rims, by use of rubber grommets. The large base plate ensures a solid contact with the rim bed and the adaptable grommets guarantee an airtight fit on most rims for mountain, road or CX use. - Universal fit. One valve for all rim types - Replaceable grommets - Kit includes VersaValve stems, two types of grommet, extra valve cores and RVC tool

- The same tubeless valves, now with a Tire Insert air flow system - 6 slots machined into the base of the valve stem allow air to flow freely around tubeless tire inserts - Upgraded to aircraft grade 7075 aluminum valve stem and cap - 4mm machined Allen Key slot for easy installation/removal - Valve core removal tool integrated into valve cap - Includes multiple rubber bases to optimize fit with multiple rim types

- 2-ply rubber shield fits between tire and tube to prevent flats

40mm Valve Core Extender

- Latex-based formula which can simultaneously inflate and seal most common punctures quickly - Works with tubes, tubeless, and tubular tires - Proven to seal up to a 6mm puncture on tubeless tires, getting you back in the saddle faster - Enough pressure to seat a tubeless tire onto a rim - Comes with an easy-to-use hose adapter and both Schrader and Presta valve compatible threaded nozzles - Fills a 29 x 2.4 MTB tire up to about 29psi

Built with Kevlar to deliver faster and stronger seals, FiberLink represents a new standard for tubeless bicycle tire sealant. Developed with Finish Line's proprietary FiberLink Technology, this groundbreaking pro latex formula seals quickly, ensures maximum seal integrity and delivers optimum longevity. - FiberLink Technology utilizes Kevlar fibers that work synergistically with fast-acting natural latex to seal punctures as they occur. Free-flowing latex cures rapidly to create an adhesive seal which is reinforced with interlinking Kevlar fibers - Low viscosity is ideal for race conditions - Fast-acting natural latex reduces air loss - Optimum longevity between refresh cycles - Low odor and easy to setup - 8oz Drip Bottle

Tubeless valves for DT Swiss rims for repair or replacement. - DT Swiss Narrow Base Tubeless Valve - 32mm

Continental's Easy Tape High Pressure Rim Strips come in sizes to fit 700c and 650c road rims and are made of a tough, elastic and waterproof, non-adhesive nylon. This makes them quick and easy to install. Just stretch them over your rims and let them snap in place! They are also made specifically for when you're running extreme pressures and can handle up to 220 psi. Each box contains a pair of rim strips.

Continental's Easy Tape Rim Strips are 20mm wide and are made of a tough, elastic and waterproof, non-adhesive nylon. This makes they quick and easy to install. Just stretch them over your rims and let them snap in place! Each box contain a pair of rim strips.

Continental's Valve Extenders are made of durable aluminum and come in four sizes so you can attach your pump to your valve, no matter how deep your rims are.

Grenade style Schrader Valve caps

• Synthetic elastomer gasket with 2X the holding power and 5X wear resistance of traditional gasket materials • Two stage seal design, improves sealing and stability on all presta valve stems • Adjustable compression, user can tighten the cap to increase holding power by 4X and compensate for wear •15 degree stem angle reduces stress on the valve stem from pump hose • 12.0g

Tubeless Valve/Tape Kit - Includes Tape, 2 Universal Valves & 1 Valve Core Wrench

Zipp's Valve Extension extends your threaded Presta valve to accommodate deep dish rims. Use these extenders with your favorite Zipp wheels to make short work of pumping up your tires.